Dongguan, China Vertical injection molding machines Technical selection starts with your part →
Machine · Rotary table

Rotary Table Vertical Injection Molding Machine

Loading, molding and unloading happen at different positions at the same time. For parts whose cycle can be split into parallel work.

Structure
Rotary table

What this structure solves

Several stations on a rotating table: loading, molding and unloading run at the same time, at different positions, so the clamp is never waiting for an operator.

Several lower mold positions are arranged on a rotating table. One position sits under the injection unit, the others are open: one being loaded, one being unloaded, one perhaps being checked. The table indexes between them, so loading, molding and unloading happen at the same time.

A rotary table is not a higher grade of machine. It is a way of splitting a cycle into parallel work, and it only pays when the work splits cleanly and the volume stays there. If the loading is quick and the molding is long, it buys floor space that nobody needed.

Typical parts

  • Terminal and connector parts with a short molding time
  • Parts with several inserts loaded per shot
  • High-volume work where loading would otherwise set the cycle
  • Cells where one position can be served by a robot or a second operator

Specification

Specifications are confirmed per application.

No confirmed rows are on file for this platform yet. Clamping force, shot weight and mold space follow from your part, your mold and the way the insert is loaded, so a table of placeholder numbers would be a guess. These four are settled with you first:

  • Clamp unit Clamping force, platen size and daylight, read against your mold.
  • Injection unit Shot weight, screw and barrel, from the part and the plastic grade.
  • Mold space Mold size, thickness and weight, and how it sits on the platens.
  • Station layout One station, a sliding table or several stations, from the loading method.

Request the Rotary table specification sheet

What we need from you

These are the inputs a selection is worked out from. Send what you have; the rest is settled in review.

  1. Part and insert data, cavities per position
  2. Mold layout for the table and the number of stations
  3. Net shot weight and target cycle
  4. How each position is loaded and checked
  5. Volume forecast — the table pays on repeat orders

Send your part drawing.

The part, the insert and the mold data decide the machine. Send them and the sheet comes back against your own mold, not against a catalogue page.

Contact Zanyang