Dongguan, China Vertical injection molding machines Technical selection starts with your part →
Machine · Single station

Single Station Vertical Injection Molding Machine

The open working area in its simplest form: place the insert by hand, clamp from above, take the part out. The baseline every other platform is measured against.

Structure
Single station

What this structure solves

The simplest vertical platform: the mold opens in front of the operator, the insert is placed by hand and the clamp closes from above. The baseline for small inserts and short runs.

The mold sits open, facing the operator, and the clamp closes from above. There is no table to travel and no second station to synchronise: the insert is placed, the clamp closes, the shot is made, the part comes out.

It is the platform to start from when the part is small, the insert is light and the volume does not justify a second station. It is also the honest answer for trial work and for shops that run several products on one machine — the simpler the mechanism, the cheaper it is to change over.

Typical parts

  • Small, delicate inserts that tolerate little clamp travel
  • Sensors, coils and electronic assemblies being encapsulated
  • Short runs and multi-product shops where change-over matters
  • Trial and prototype tooling before a line is committed

Specification

Specifications are confirmed per application.

No confirmed rows are on file for this platform yet. Clamping force, shot weight and mold space follow from your part, your mold and the way the insert is loaded, so a table of placeholder numbers would be a guess. These four are settled with you first:

  • Clamp unit Clamping force, platen size and daylight, read against your mold.
  • Injection unit Shot weight, screw and barrel, from the part and the plastic grade.
  • Mold space Mold size, thickness and weight, and how it sits on the platens.
  • Station layout One station, a sliding table or several stations, from the loading method.

Request the Single station specification sheet

What we need from you

These are the inputs a selection is worked out from. Send what you have; the rest is settled in review.

  1. Part photo and 2D drawing
  2. Plastic and grade, net shot weight
  3. Insert size, material and how it is located
  4. Mold plan or existing mold drawing
  5. Annual volume and change-over frequency

Send your part drawing.

The part, the insert and the mold data decide the machine. Send them and the sheet comes back against your own mold, not against a catalogue page.

Contact Zanyang