Dongguan, China Vertical injection molding machines Technical selection starts with your part →
Machine · Sliding table

Sliding Table Vertical Injection Molding Machine

Loading happens outside the clamp while the machine keeps its cycle. The first step up from a single station, without paying for a second table.

Structure
Sliding table
Vertical injection molding machine

What this structure solves

One table slides out of the clamp so the insert is loaded outside the molding area, with a guard between the operator and the clamp.

One table slides out of the clamp. The operator loads outside the molding area, then the table travels in and the clamp closes. Between the two positions there is a guard, so hands are never in the clamp when it moves.

It is the first step up from a single station, and usually the right one when a hand-loaded insert has started to set the rate but there is still enough molding time to cover the loading. It also keeps the operator out of the clamp envelope, which is worth more than the cycle.

Typical parts

  • Cable overmolding and molded plugs
  • Hardware overmolding with hand-loaded inserts
  • Moderate volumes where loading time is a part of the cycle
  • Any part where the operator must stay clear of the clamp

Specification

Specifications are confirmed per application.

No confirmed rows are on file for this platform yet. Clamping force, shot weight and mold space follow from your part, your mold and the way the insert is loaded, so a table of placeholder numbers would be a guess. These four are settled with you first:

  • Clamp unit Clamping force, platen size and daylight, read against your mold.
  • Injection unit Shot weight, screw and barrel, from the part and the plastic grade.
  • Mold space Mold size, thickness and weight, and how it sits on the platens.
  • Station layout One station, a sliding table or several stations, from the loading method.

Request the Sliding table specification sheet

What we need from you

These are the inputs a selection is worked out from. Send what you have; the rest is settled in review.

  1. Part photo, drawing and net plastic weight
  2. Insert data and how it is positioned on the table
  3. Mold size, shut height and weight for the table
  4. Target cycle and operator count
  5. Plant supply: voltage, frequency, air and water

Send your part drawing.

The part, the insert and the mold data decide the machine. Send them and the sheet comes back against your own mold, not against a catalogue page.

Contact Zanyang